It doesn’t matter if it’s for your own personal security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly operational is really important. In reality, bulbs are wearing auto parts that will obviously burn out with time and therefore need to be changed. You’re likely on this website because one of your parking lights is burnt out and you’re struggling with how to change your BMW 2 Series’s license plate bulb, we’ve written this document to help you do it on your own and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your BMW 2 Series.
How to swap the license plate bulb on your BMW 2 Series through the outside
This approach is the fastest of the two, in fact, for this one you will only have to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second section of this article content to demonstrate the approach.
So let’s begin with replacing the number plate bulb by going through the outside of your BMW 2 Series. It doesn’t matter if it’s the front or the back of your automobile the method will be identical.
Here are a few simple actions to follow to carry out this maintenance tasks:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this purpose (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your BMW 2 Series
- Use your screwdriver or knife to remove the bulb from its spot, in the event that you are worried of damaging anything, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the successfulness of the task.
.
How to change the number plate bulb on your BMW 2 Series without outside access
Second section of our document, replace this license plate bulb on your BMW 2 Series without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my BMW 2 Series
To swap the one on the front plate, nothing could be easier, you will have to position yourself under the automobile (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to exert too much force otherwise you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.
How to swap the rear license plate bulb on my BMW 2 Series
Finally last option, you must swap the bulb on the backplate of your BMW 2 Series, but you are not able to open the cover from the outside of your automobile. In this case, here is the solution to carry out this operation:
- Disconnect the battery from your BMW 2 Series
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your BMW 2 Series, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main solutions for replacing license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to do it following the outline of this content. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your BMW 2 Series. If you wish to change other bulbs like the position light bulbs on your BMW 2 Series or the low beam bulbs on BMW 2 Series, don’t be reluctant to consult our articles which explain you the procedure to follow.
Whenever you have any further questions about the BMW 2 Series, do not hesitate to consult our BMW 2 Series category.
