Whether it’s for your personal security, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are constantly effective is fundamental. Indeed, bulbs are wearing auto parts that will surely burn out after a while and consequently need to be swapped out. You’re probably on this site because one of your parking lights is burnt out and you’re questioning how to change your Alfa Romeo Gt’s license plate bulb, we’ve written this document to help you do it without any help and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Alfa Romeo Gt.
How to change the license plate bulb on your Alfa Romeo Gt throughout the outside
This technique is the easiest of the two, in truth, for this one you will only require to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take some time on in the second part of this content to teach you the method.
So let’s start with changing the number plate bulb by going through the outside of your Alfa Romeo Gt. Whether it’s the front or the back of your motor vehicle the method will be the same.
Here are a few simple steps to follow to perform this maintenance tasks:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this goal (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Alfa Romeo Gt
- Use your screwdriver or knife to eject the bulb from its place, if you are worried of damaging a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to confirm the successfulness of the operation.
.
How to change the number plate bulb on your Alfa Romeo Gt without outside access
Second part of our item, change this license plate bulb on your Alfa Romeo Gt without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Alfa Romeo Gt
To change the one on the front plate, nothing could be less complicated, you will have to position yourself under the motor vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly held by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to apply too much force otherwise you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Alfa Romeo Gt
Finally last solution, you must change the bulb on the backplate of your Alfa Romeo Gt, but you simply cannot open the cover from the outside of your motor vehicle. In this case, here is the approach to conduct this operation:
- Disconnect the battery from your Alfa Romeo Gt
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Alfa Romeo Gt, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main ways for changing license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to realize it following the explanation of this article. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Alfa Romeo Gt. If you want to change other bulbs like the position light bulbs on your Alfa Romeo Gt or the low beam bulbs on Alfa Romeo Gt, don’t be reluctant to browse our content articles which explain you the process to follow.
If you wish more guides on the Alfa Romeo Gt, go to our Alfa Romeo Gt category.
