It doesn’t matter if for your personal safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always functioning is imperative. In fact, bulbs are wearing parts that will inevitably burn out over the years and as a result need to be replaced. You’re probably here because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Volkswagen Crafter, we’ve written and published this content page to help you do it by yourself and not have to go to your mechanic. In a first step, we will look at the checking a burnt-out front turn signal bulb on your Volkswagen Crafter and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-volkswagen-crafter

How to recognise if the front turn signal bulb on your Volkswagen Crafter is burnt out or needs to be changed?

When you drive your automobile you don’t constantly have the possibility to check all the safety equipments of your Volkswagen Crafter. In fact, you are frequently in a hurry and tend to get into your automobile, make your trip and put it down right away without taking the time to do an regular check-up. It is consequently fundamental to take the time to once in a while check the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Volkswagen Crafter, but that you didn’t become aware of it. Here are the two simple options to check if a front turn signal is burnt out or if you need to change it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are working.
  • By hearing to the sound of your blinkers. In fact, there is an audible signal on each car that warns you of a front turn indicator bulb burnt out on your Volkswagen Crafter, you will perceive that the time between each “click” is much closer, this means that you will have to replace the front turn signal bulb or before. It’s up to you to check and make sure which one is burnt out by a visual check as on the first process shown earlier mentioned.

You may have another bulb to change, like the one of your low beam or your position lights, don’t be reluctant to browse our blog posts to help you to perform this replacing.

Replacing the front turn signal bulb on your Volkswagen Crafter

Now let’s go to the most essential step of this content page, how to replace the front turn signal bulb of your Volkswagen Crafter? Please note that this procedure is uncomplicated, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Volkswagen Crafter. If it is a bulb on your rear turn signal, see our specific content page. However, here are the details of the guidelines to stick to in order to accomplish this act accurately according to the approach you want to adopt.

Change front turn signal bulb on your Volkswagen Crafter through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Volkswagen Crafter by the new one (make sure to check if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb is effective.

    • Change the front turn signal bulb of your Volkswagen Crafter through the wheel arch:

    This tactic is specifically useful when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same guidelines as on the part previously seen.

    Change the front turn signal bulb of your Volkswagen Crafter through the bumper:

    On some years or finishes, according to the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will explain them right now:

    • Put your Volkswagen Crafter on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be breakable.
    • Remove your headlight block and change the front turn indicator bulb of your Volkswagen Crafter following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    To discover more tips on the Volkswagen Crafter, take a look at the Volkswagen Crafter category.