Whether for your personal security, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are always functioning is important. In fact, bulbs are wearing parts that will inevitably burn out with time and therefore need to be replaced. You’re most likely on this website because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Volkswagen Amarok, we’ve made this content page to help you do it without hiring somebody and not have to go to your mechanic. In a first part, we will have a look at the checking a burnt-out front turn signal bulb on your Volkswagen Amarok and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-volkswagen-amarok

How to recognise if the front turn signal bulb on your Volkswagen Amarok is burnt out or needs to be changed?

When you drive your automobile you don’t constantly have the possibility to verify all the security equipments of your Volkswagen Amarok. In fact, you are most of the time in a rush and tend to get into your automobile, make your trip and put it down immediately without taking the time to do an occasional check-up. It is consequently important to take the time to sometimes verify the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Volkswagen Amarok, but that you didn’t become aware of it. Here are the two simple methods to control if a front turn signal is burnt out or if you need to replace it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are operational.
  • By listening to the sound of your blinkers. In fact, there is an audible signal on each car that informs you of a front turn indicator bulb burnt out on your Volkswagen Amarok, you will identify that the time between each “click” is much shorter, this suggests that you will have to replace the front turn signal bulb or before. It’s up to you to verify and check which one is burnt out by a visual control as on the first technique shown above.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t hesitate to read our blog posts to help you to perform this replacement.

Replacing the front turn signal bulb on your Volkswagen Amarok

Now let’s go to the main part of this content page, how to replace the front turn signal bulb of your Volkswagen Amarok? Take note that this operation is fairly simple, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Volkswagen Amarok. If it is a bulb on your rear turn signal, see our specific content page. However, here are the details of the actions to stick to in order to conduct this act properly depending on the approach you desire to adopt.

Replace front turn signal bulb on your Volkswagen Amarok through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Volkswagen Amarok by the new one (be sure to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb works.

    • Replace the front turn signal bulb of your Volkswagen Amarok through the wheel arch:

    This technique is specially useful when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Change the front turn signal bulb of your Volkswagen Amarok through the bumper:

    On some years or finishes, according to the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will describe them now:

    • Put your Volkswagen Amarok on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be vulnerable.
    • Take off your headlight block and replace the front turn indicator bulb of your Volkswagen Amarok following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    To find more tips on the Volkswagen Amarok, take a look at the Volkswagen Amarok category.