Whether for your own security, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always functioning is necessary. In fact, bulbs are wearing parts that will inevitably burn out over the years and therefore need to be changed. You’re most certainly on the website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Toyota Land Cruiser Serie 70, we’ve made this article to help you do it all on your own and not have to go to your repair shop. In a first step, we will have a look at the checking a burnt-out front turn signal bulb on your Toyota Land Cruiser Serie 70 and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-toyota-land-cruiser-serie-70

How to know if the front turn signal bulb on your Toyota Land Cruiser Serie 70 is burnt out or needs to be swapped out?

When you drive your motor vehicle you don’t constantly have the possibility to verify all the security components of your Toyota Land Cruiser Serie 70. In fact, you are often times in a hurry and tend to get into your motor vehicle, make your trip and put it down immediately without taking the time to do an unexpected check-up. It is as a result relevant to take the time to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Toyota Land Cruiser Serie 70, but that you didn’t notice it. Here are the two simple solutions to check if a front turn signal is burnt out or if you need to swap it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are operational.
  • By hearing to the sound of your blinkers. In fact, there is an audible signal on each car that alerts you of a front turn indicator bulb burnt out on your Toyota Land Cruiser Serie 70, you will notice that the time between each “click” is much shorter, this suggests that you will have to swap the front turn signal bulb or before. It’s up to you to verify and make sure which one is burnt out by a visual check as on the first methodology shown earlier mentioned.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t hesitate to consult our blog posts to help you to complete this replacement.

Replacing the front turn signal bulb on your Toyota Land Cruiser Serie 70

Now let’s go to the main step of this article, how to replace the front turn signal bulb of your Toyota Land Cruiser Serie 70? You should be aware that this technique is really easy, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Toyota Land Cruiser Serie 70. If it is a bulb on your rear turn signal, see our dedicated article. On the other hand, here are the details of the guidelines to stick to in order to perform this act correctly depending on the technique you desire to choose.

Change front turn signal bulb on your Toyota Land Cruiser Serie 70 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Toyota Land Cruiser Serie 70 by the new one (be sure to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb is effective.

    • Change the front turn signal bulb of your Toyota Land Cruiser Serie 70 through the wheel arch:

    This tactic is particularly effective when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Change the front turn signal bulb of your Toyota Land Cruiser Serie 70 through the bumper:

    On some years or finishes, based on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will describe them now:

    • Put your Toyota Land Cruiser Serie 70 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be vulnerable.
    • Take out your headlight block and swap the front turn indicator bulb of your Toyota Land Cruiser Serie 70 following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If you wish more guides on the Toyota Land Cruiser Serie 70, go to our Toyota Land Cruiser Serie 70 category.