Whether for your own security, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always operational is necessary. In reality, bulbs are wearing parts that will obviously burn out after awhile and therefore need to be swapped out. You’re most likely in this article because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Suzuki Jimny, we’ve written this article content to help you do it alone and independently and not have to go to your auto mechanic. In a first step, we will have a look at the checking a burnt-out front turn signal bulb on your Suzuki Jimny and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-suzuki-jimny

How to recognise if the front turn signal bulb on your Suzuki Jimny is burnt out or needs to be changed?

When you drive your car you don’t constantly have the possibility to examine all the security features of your Suzuki Jimny. In reality, you are in many cases in a rush and tend to enter into your car, make your journey and put it down instantly without taking the time to do an occasional check-up. It is therefore crucial to take the time to once in a while examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Suzuki Jimny, but that you didn’t realize it. Here are the two simple solutions to examine if a front turn signal is burnt out or if you need to replace it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are operational.
  • By listening to the sound of your blinkers. In reality, there is an audible sign on each car that signals you of a front turn indicator bulb burnt out on your Suzuki Jimny, you will perceive that the time between each “click” is much shorter, this suggests that you will have to swap the front turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual examine as on the first methodology shown earlier mentioned.

You may have an additional bulb to replace, like the one of your low beam or your position lights, don’t hesitate to consult our content articles to help you to carry out this substitution.

Changing the front turn signal bulb on your Suzuki Jimny

Now let’s go to the most important step of this article content, how to replace the front turn signal bulb of your Suzuki Jimny? Please note that this operation is fairly simple, you will have to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Suzuki Jimny. If it is a bulb on your rear turn signal, see our specific article content. However, here are the details of the simple steps to stick to in order to perform this action efficiently depending on the strategy you wish to choose.

Replace front turn signal bulb on your Suzuki Jimny through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Suzuki Jimny by the new one (make sure to examine if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb is effective.

    • Replace the front turn signal bulb of your Suzuki Jimny through the wheel arch:

    This solution is extremely valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Replace the front turn signal bulb of your Suzuki Jimny through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will describe them now:

    • Put your Suzuki Jimny on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be vulnerable.
    • Take off your headlight block and replace the front turn indicator bulb of your Suzuki Jimny following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If perhaps you have any further questions about the Suzuki Jimny, do not hesitate to consult our Suzuki Jimny category.