It doesn’t matter if for your personal safety, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always functioning is extremely important. In reality, bulbs are wearing parts that will inevitably burn out after some time and therefore need to be replaced. You’re probably in this article because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Renault Twingo 3, we’ve written and published this content to help you do it all on your own and not have to go to your repair shop. In a first step, we will look at the checking a burnt-out front turn signal bulb on your Renault Twingo 3 and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-renault-twingo-3

How to recognise if the front turn signal bulb on your Renault Twingo 3 is burnt out or needs to be changed?

When you drive your motor vehicle you don’t constantly have the possibility to verify all the safety components of your Renault Twingo 3. In reality, you are frequently in a rush and tend to get into your motor vehicle, make your trip and put it down instantly without taking the time to do an regular check-up. It is as a result essential to take the time to occasionally verify the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Renault Twingo 3, but that you didn’t detect it. Here are the two simple ways to examine if a front turn signal is burnt out or if you need to change it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are functioning.
  • By hearing to the sound of your blinkers. In reality, there is an audible sign on each car that informs you of a front turn indicator bulb burnt out on your Renault Twingo 3, you will recognise that the time between each “click” is much closer, this means that you will have to replace the front turn signal bulb or before. It’s up to you to verify and examine which one is burnt out by a visual examine as on the first process shown above.

You may have an additional bulb to change, like the one of your low beam or your position lights, don’t be reluctant to consult our articles to help you to carry out this substitution.

Changing the front turn signal bulb on your Renault Twingo 3

Now let’s go to the most significant step of this content, how to replace the front turn signal bulb of your Renault Twingo 3? Please be aware that this procedure is quite simple, you will have to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Renault Twingo 3. If it is a bulb on your rear turn signal, see our dedicated content. On the other hand, here are the details of the steps to follow to be able to carry out this action efficiently according to the strategy you want to adopt.

Replace front turn signal bulb on your Renault Twingo 3 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Renault Twingo 3 by the new one (be sure to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb operates.

    • Replace the front turn signal bulb of your Renault Twingo 3 through the wheel arch:

    This approach is especially practical when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Change the front turn signal bulb of your Renault Twingo 3 through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will detail them right now:

    • Put your Renault Twingo 3 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be breakable.
    • Remove your headlight block and change the front turn indicator bulb of your Renault Twingo 3 following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If you want more guides on the Renault Twingo 3, go to our Renault Twingo 3 category.