Contemporary automobiles have more and more functionnalities and despite the fact they bring us a lot of comfort, some of them are not always easy to use. No matter you have rented a car, been lent one, or just bought a Renault Twingo 3, depending on its functionnalities, it can be complicated to know precisely how to start a Renault Twingo 3? Even if this essential act of running a car may seem self evident to many of you, according to the options and the year of production of your car, it will be more or less basic to do so. Today we will show you the several procedures to start a Renault Twingo 3 with the key, then, in a second section, how to switch on a Renault Twingo 3 with a card, and finally, without using the key.

start-renault-twingo-3

How to start a Renault Twingo 3 with key?

So we start our article which is designed to learn you how to start a Renault Twingo 3, which is supplied with a classic key start. Find listed below the different measures to be done to turn on the engine of your Renault Twingo 3:

  • Identify the location of the neiman (hole in which the key is inserted), it is most of the time on the right side of your steering wheel, on the dash. If your steering wheel is blocked, do not be reluctant to browse our article on the steering wheel blocked on Renault Twingo 3 that is blocked to discover how to unblock it.
  • Put the key into this one.
  • Verify that you are in neutral for a manual car and in the “N” or “P” position for an automatic transmission.
  • Turn the ignition on by turning it clockwise a quarter turn until you feel you’ve passed the first notch.
  • Check on your dashboard that the orange lights turn off, if you don’t know what they signify don’t be reluctant to browse our article on orange lights on Renault Twingo 3 to learn the explanation for this.
  • You just have to go one more notch clockwise and hold it in the stop until your Renault Twingo 3 starts (do not let your starter run more than 10 seconds otherwise you risk harming it, if the car does not start, let it rest a few tens of seconds before a new test)
  • .

  • That’s it. You handled to start your Renault Twingo 3,

How to start a Renault Twingo 3 with the key card?

After finding out about how to turn on the engine of a Renault Twingo 3 with key or will teach you you how to do it for a Renault Twingo 3 equipped with a key card and not a key. The technique remains pretty much similar, so don’t be reluctant to return to the previous section to have information on each of the steps to do. Learn below the steps to adhere to to start your Renault Twingo 3 with a card:

  • According to the year and the series, you may or may not need to put in the card in a dedicated slot, check on your dashboard if your Renault Twingo 3 is equipped with this slot or not.
  • If it has one, insert the card in this hole, otherwise you can keep the card on you or anywhere in the cabin.
  • Find the “start” button, which is in most cases placed at steering wheel height close to the classic neiman location, otherwise it is in most cases located on the centre console.
  • Verify that you’re in neutral or neutral on an automatic transmission.
  • Push the “start” button once to turn on the ignition of your Renault Twingo 3
  • .

  • Push a second time after a few seconds or extinction of the orange lights on your dashboard to start your Renault Twingo 3

.

How do I start a Renault Twingo 3 without a key?

And finally, we will see, how to start a Renault Twingo 3 without a key? Let’s imagine that you have lost your keys and your car is open, this might seem logical. Even so, you should know that if your Renault Twingo 3 is more recent than the mid 90’s it will be hard to turn on it without a key because of all the security devices present on it. As expected, this should only be done on YOUR car. Here is the technique to stick to:

  • Remove the cover that protects your steering wheel and find among the 3 electric switches the one that concerns your engine/battery/starter (to help you, please bring your user manual).
  • Strip, connect them together and isolate the battery and ignition wires (be careful not to electrocute yourself during the process). You now have electricity as if you had the contact
  • Finally, strip the starter wire and connect it promptly with the battery wire (do not make lengthened contact and only 1 or 2 seconds should be enough to start your Renault Twingo 3).

There, you’ve found out all the options to start a Renault Twingo 3.

To discover more tips on the Renault Twingo 3, take a look at the Renault Twingo 3 category.