It doesn’t matter if for your personal safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always operational is important. In reality, bulbs are wearing parts that will inevitably burn out after some time and consequently need to be changed. You’re perhaps on this website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Peugeot Expert, we’ve created this article to help you do it alone and independently and not have to go to your mechanic. In a first step, we will take a look at controling a burnt-out front turn signal bulb on your Peugeot Expert and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-peugeot-expert

How to know if the front turn signal bulb on your Peugeot Expert is burnt out or needs to be changed?

When you drive your vehicle you don’t constantly have the possibility to check all the safety equipments of your Peugeot Expert. In reality, you are most likely in a rush and tend to get into your vehicle, make your journey and put it down immediately without taking the time to do an unexpected check-up. It is as a consequence relevant to take the time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Peugeot Expert, but that you didn’t become aware of it. Here are the two simple methods to control if a front turn signal is burnt out or if you need to swap it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are functioning.
  • By hearing to the sound of your blinkers. In reality, there is an audible indicator on each car that alerts you of a front turn indicator bulb burnt out on your Peugeot Expert, you will notice that the time between each “click” is much closer, this means that you will have to change the front turn signal bulb or before. It’s up to you to check and examine which one is burnt out by a visual control as on the first technique shown previously.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t hesitate to read our articles to help you to achieve this replacing.

Changing the front turn signal bulb on your Peugeot Expert

Now let’s go to the main step of this article, how to change the front turn signal bulb of your Peugeot Expert? Please note that this procedure is quite simple, you will require to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Peugeot Expert. If it is a bulb on your rear turn signal, see our specific article. On the other hand, here are the details of the steps to follow to be able to carry out this action efficiently according to the strategy you wish to choose.

Change front turn signal bulb on your Peugeot Expert through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Peugeot Expert by the new one (be sure to check if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb is effective.

    • Change the front turn signal bulb of your Peugeot Expert through the wheel arch:

    This tactic is specially valuable when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Change the front turn signal bulb of your Peugeot Expert through the bumper:

    On some years or finishes, according to the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will explain them now:

    • Put your Peugeot Expert on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be vulnerable.
    • Take off your headlight block and swap the front turn indicator bulb of your Peugeot Expert following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    Whenever you have any additional questions about the Peugeot Expert, do not hesitate to consult our Peugeot Expert category.