Whether for your own safety, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always operational is very important. In fact, bulbs are wearing parts that will undoubtedly burn out with time and therefore need to be changed. You’re most likely here because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Peugeot 5008, we’ve written this article content to help you do it on your own and not have to go to your auto technician. In a first step, we will have a look at controling a burnt-out front turn signal bulb on your Peugeot 5008 and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-peugeot-5008

How to recognize if the front turn signal bulb on your Peugeot 5008 is burnt out or needs to be swapped out?

When you drive your vehicle you don’t always have the opportunity to verify all the safety components of your Peugeot 5008. In fact, you are most likely in a rush and tend to enter into your vehicle, make your journey and put it down instantly without taking the time to do an periodic check-up. It is as a result crucial to take the time to in some cases verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Peugeot 5008, but that you didn’t detect it. Here are the two simple methods to check if a front turn signal is burnt out or if you need to replace it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are operational.
  • By hearing to the sound of your blinkers. In fact, there is an audible signal on each car that informs you of a front turn indicator bulb burnt out on your Peugeot 5008, you will identify that the time between each “click” is much shorter, this denotes that you will have to change the front turn signal bulb or before. It’s up to you to verify and make sure which one is burnt out by a visual check as on the first solution shown above.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to read our blog posts to help you to accomplish this substitution.

Changing the front turn signal bulb on your Peugeot 5008

Now let’s go to the main step of this article content, how to replace the front turn signal bulb of your Peugeot 5008? You should be aware that this process is uncomplicated, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Peugeot 5008. If it is a bulb on your rear turn signal, see our special article content. However, here are the details of the guidelines to follow in order to accomplish this action accurately depending on the method you wish to choose.

Change front turn signal bulb on your Peugeot 5008 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Peugeot 5008 by the new one (make certain to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb works.

    • Change the front turn signal bulb of your Peugeot 5008 through the wheel arch:

    This solution is specifically useful when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Change the front turn signal bulb of your Peugeot 5008 through the bumper:

    On some years or finishes, based on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will explain them right now:

    • Put your Peugeot 5008 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be fragile.
    • Remove your headlight block and replace the front turn indicator bulb of your Peugeot 5008 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you want more guides on the Peugeot 5008, go to our Peugeot 5008 category.