Regardless for your own security, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always functional is important. In fact, bulbs are wearing parts that will undoubtedly burn out over the years and as a result need to be replaced. You’re most likely here because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Peugeot 407, we’ve created this content page to help you do it alone and independently and not have to go to your technician. In a first part, we will take a look at controling a burnt-out front turn signal bulb on your Peugeot 407 and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-peugeot-407

How to recognize if the front turn signal bulb on your Peugeot 407 is burnt out or needs to be replaced?

When you drive your automobile you don’t constantly have the opportunity to examine all the security features of your Peugeot 407. In fact, you are in general in a hurry and tend to get into your automobile, make your trip and put it down instantly without taking the time to do an regular check-up. It is therefore essential to take the time to in some cases examine the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Peugeot 407, but that you didn’t notice it. Here are the two simple methods to examine if a front turn signal is burnt out or if you need to replace it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are operational.
  • By hearing to the sound of your blinkers. In fact, there is an audible indicator on each car that informs you of a front turn indicator bulb burnt out on your Peugeot 407, you will find out that the time between each “click” is much closer, this denotes that you will have to swap the front turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual examine as on the first procedure shown previously.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to read our articles to help you to conduct this replacement.

Replacing the front turn signal bulb on your Peugeot 407

Now let’s go to the main part of this content page, how to replace the front turn signal bulb of your Peugeot 407? Take note that this procedure is really easy, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Peugeot 407. If it is a bulb on your rear turn signal, see our specific content page. Nevertheless, here are the details of the actions to stick to to be able to execute this act properly depending on the solution you want to adopt.

Change front turn signal bulb on your Peugeot 407 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Peugeot 407 by the new one (ensure to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb is effective.

    • Change the front turn signal bulb of your Peugeot 407 through the wheel arch:

    This process is particularly valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Replace the front turn signal bulb of your Peugeot 407 through the bumper:

    On some years or finishes, based on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will explain them now:

    • Put your Peugeot 407 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be fragile.
    • Take away your headlight block and replace the front turn indicator bulb of your Peugeot 407 following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    If you wish more tutorials on the Peugeot 407, go to our Peugeot 407 category.