Regardless whether for your own safety, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always functional is imperative. Indeed, bulbs are wearing parts that will undoubtedly burn out after a while and therefore need to be swapped out. You’re most certainly here because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Peugeot 508, we’ve written this article to help you do it on your own and not have to go to your repair shop. In a first section, we will examine the checking a burnt-out front turn signal bulb on your Peugeot 508 and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-peugeot-508

How to find out if the front turn signal bulb on your Peugeot 508 is burnt out or needs to be replaced?

When you drive your motor vehicle you don’t constantly have the opportunity to verify all the safety components of your Peugeot 508. Indeed, you are nearly always in a hurry and tend to enter into your motor vehicle, make your journey and put it down right away without taking the time to do an periodic check-up. It is as a result essential to take the time to sometimes verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Peugeot 508, but that you didn’t realize it. Here are the two simple techniques to control if a front turn signal is burnt out or if you need to change it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are working.
  • By hearing to the sound of your blinkers. Indeed, there is an audible sign on each car that signals you of a front turn indicator bulb burnt out on your Peugeot 508, you will notice that the time between each “click” is much shorter, this denotes that you will have to swap the front turn signal bulb or before. It’s up to you to verify and check which one is burnt out by a visual control as on the first technique shown previously.

You may have another bulb to change, like the one of your low beam or your position lights, don’t hesitate to browse our content articles to help you to accomplish this substitution.

Changing the front turn signal bulb on your Peugeot 508

Now let’s go to the most essential section of this article, how to replace the front turn signal bulb of your Peugeot 508? Please note that this task is really easy, you will have to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Peugeot 508. If it is a bulb on your rear turn signal, see our dedicated article. On the other hand, here are the details of the steps to follow in order to perform this action accurately dependant on the approach you wish to adopt.

Replace front turn signal bulb on your Peugeot 508 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Peugeot 508 by the new one (ensure to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb is effective.
  • Replace the front turn signal bulb of your Peugeot 508 through the wheel arch:

    This tactic is extremely effective when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Replace the front turn signal bulb of your Peugeot 508 through the bumper:

    On some years or finishes, according to the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will point them right now:

    • Put your Peugeot 508 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be breakable.
    • Take off your headlight block and change the front turn indicator bulb of your Peugeot 508 following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    If you wish more guides on the Peugeot 508, go to our Peugeot 508 category.