Whether for your own security, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are always operational is very important. In reality, bulbs are wearing parts that will predictably burn out after a while and therefore need to be replaced. You’re most certainly here because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Peugeot 4007, we’ve created this article content to help you do it alone and independently and not have to go to your technician. In a first step, we will examine controling a burnt-out front turn signal bulb on your Peugeot 4007 and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-peugeot-4007

How to find out if the front turn signal bulb on your Peugeot 4007 is burnt out or needs to be swapped out?

When you drive your automobile you don’t constantly have the opportunity to verify all the security equipments of your Peugeot 4007. In reality, you are most likely in a rush and tend to enter into your automobile, make your journey and put it down immediately without taking the time to do an periodic check-up. It is consequently important to take the time to occasionally verify the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Peugeot 4007, but that you didn’t realize it. Here are the two simple options to control if a front turn signal is burnt out or if you need to replace it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are functional.
  • By listening to the sound of your blinkers. In reality, there is an audible sign on each car that informs you of a front turn indicator bulb burnt out on your Peugeot 4007, you will find out that the time between each “click” is much closer, this denotes that you will have to swap the front turn signal bulb or before. It’s up to you to verify and verify which one is burnt out by a visual control as on the first methodology shown earlier mentioned.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t hesitate to consult our articles to help you to accomplish this replacement.

Changing the front turn signal bulb on your Peugeot 4007

Now let’s go to the main step of this article content, how to replace the front turn signal bulb of your Peugeot 4007? Take note that this process is really easy, you will need to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Peugeot 4007. If it is a bulb on your rear turn signal, see our specific article content. On the other hand, here are the details of the simple steps to stick to to be able to perform this action correctly dependant on the method you wish to adopt.

Replace front turn signal bulb on your Peugeot 4007 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Peugeot 4007 by the new one (ensure to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb is effective.

    • Replace the front turn signal bulb of your Peugeot 4007 through the wheel arch:

    This methodology is specially practical when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same guidelines as on the part previously seen.

    Change the front turn signal bulb of your Peugeot 4007 through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will detail them right now:

    • Put your Peugeot 4007 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be delicate.
    • Take away your headlight block and replace the front turn indicator bulb of your Peugeot 4007 following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If you have any further questions about the Peugeot 4007, do not hesitate to consult our Peugeot 4007 category.