Regardless whether for your own security, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always working is important. Indeed, bulbs are wearing parts that will inevitably burn out with time and as a result need to be swapped out. You’re almost certainly in this article because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Nissan Almera, we’ve made this document to help you do it without hiring somebody and not have to go to your technician. In a first section, we will have a look at the checking a burnt-out front turn signal bulb on your Nissan Almera and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-nissan-almera

How to discover if the front turn signal bulb on your Nissan Almera is burnt out or needs to be replaced?

When you drive your vehicle you don’t constantly have the opportunity to examine all the security components of your Nissan Almera. Indeed, you are in general in a rush and tend to get into your vehicle, make your trip and put it down immediately without taking the time to do an occasional check-up. It is as a result essential to take the time to once in a while examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Nissan Almera, but that you didn’t become aware of it. Here are the two simple options to control if a front turn signal is burnt out or if you need to replace it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are functional.
  • By hearing to the sound of your blinkers. Indeed, there is an audible signal on each car that informs you of a front turn indicator bulb burnt out on your Nissan Almera, you will notice that the time between each “click” is much shorter, this suggests that you will have to change the front turn signal bulb or before. It’s up to you to examine and examine which one is burnt out by a visual control as on the first technique shown above.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to browse our articles to help you to conduct this replacing.

Changing the front turn signal bulb on your Nissan Almera

Now let’s go to the most significant section of this document, how to change the front turn signal bulb of your Nissan Almera? Please be aware that this technique is quite simple, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Nissan Almera. If it is a bulb on your rear turn signal, see our special document. However, here are the details of the actions to stick to to be able to accomplish this act properly dependant on the strategy you desire to choose.

Replace front turn signal bulb on your Nissan Almera through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Nissan Almera by the new one (make certain to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb is effective.

    • Replace the front turn signal bulb of your Nissan Almera through the wheel arch:

    This tactic is especially effective when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Replace the front turn signal bulb of your Nissan Almera through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will explain them now:

    • Put your Nissan Almera on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be fragile.
    • Take out your headlight block and replace the front turn indicator bulb of your Nissan Almera following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If you want more tutorials on the Nissan Almera, go to our Nissan Almera category.