Regardless whether for your own safety, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always functioning is necessary. Indeed, bulbs are wearing parts that will obviously burn out after a while and therefore need to be replaced. You’re most likely on this site because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Land Rover Range Rover, we’ve created this article content to help you do it all on your own and not have to go to your mechanic. In a first part, we will have a look at controling a burnt-out front turn signal bulb on your Land Rover Range Rover and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-land-rover-range-rover

How to recognise if the front turn signal bulb on your Land Rover Range Rover is burnt out or needs to be replaced?

When you drive your vehicle you don’t constantly have the possibility to examine all the safety features of your Land Rover Range Rover. Indeed, you are mostly in a hurry and tend to enter into your vehicle, make your trip and put it down immediately without taking the time to do an occasional check-up. It is as a result essential to take the time to once in a while examine the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Land Rover Range Rover, but that you didn’t notice it. Here are the two simple methods to examine if a front turn signal is burnt out or if you need to change it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are operational.
  • By listening to the sound of your blinkers. Indeed, there is an audible indicator on each car that informs you of a front turn indicator bulb burnt out on your Land Rover Range Rover, you will recognise that the time between each “click” is much shorter, this suggests that you will have to change the front turn signal bulb or before. It’s up to you to examine and check out which one is burnt out by a visual examine as on the first procedure shown previously.

You may have another bulb to change, like the one of your low beam or your position lights, don’t be reluctant to consult our content articles to help you to perform this substitution.

Changing the front turn signal bulb on your Land Rover Range Rover

Now let’s go to the most significant part of this article content, how to change the front turn signal bulb of your Land Rover Range Rover? Please note that this task is really easy, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Land Rover Range Rover. If it is a bulb on your rear turn signal, see our specific article content. On the other hand, here are the details of the steps to stick to to be able to conduct this action efficiently according to the technique you wish to choose.

Change front turn signal bulb on your Land Rover Range Rover through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Land Rover Range Rover by the new one (make sure to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb functions.
  • Change the front turn signal bulb of your Land Rover Range Rover through the wheel arch:

    This procedure is specifically valuable when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Change the front turn signal bulb of your Land Rover Range Rover through the bumper:

    On some years or finishes, based on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will point them right now:

    • Put your Land Rover Range Rover on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be delicate.
    • Take off your headlight block and change the front turn indicator bulb of your Land Rover Range Rover following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    To find more tips on the Land Rover Range Rover, take a look at the Land Rover Range Rover category.