Regardless for your personal safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always functional is imperative. Indeed, bulbs are wearing parts that will definitely burn out after a while and therefore need to be replaced. You’re quite likely on the website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your hyundai getz, we’ve written this content page to help you do it on your own and not have to go to your mechanic. In a first part, we will look at controling a burnt-out front turn signal bulb on your hyundai getz and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-hyundai-getz

How to recognize if the front turn signal bulb on your hyundai getz is burnt out or needs to be swapped out?

When you drive your vehicle you don’t always have the opportunity to check all the safety features of your hyundai getz. Indeed, you are nearly always in a rush and tend to enter into your vehicle, make your trip and put it down right away without taking the time to do an occasional check-up. It is therefore fundamental to take the time to sometimes check the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your hyundai getz, but that you didn’t become aware of it. Here are the two simple ways to check if a front turn signal is burnt out or if you need to replace it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are operational.
  • By hearing to the sound of your blinkers. Indeed, there is an audible indication on each car that warns you of a front turn indicator bulb burnt out on your hyundai getz, you will perceive that the time between each “click” is much closer, this suggests that you will have to replace the front turn signal bulb or before. It’s up to you to check and check which one is burnt out by a visual check as on the first procedure shown previously.

You may have an additional bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to read our blog posts to help you to conduct this substitution.

Replacing the front turn signal bulb on your hyundai getz

Now let’s go to the most essential part of this content page, how to change the front turn signal bulb of your hyundai getz? You should be aware that this operation is quite simple, you will require to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your hyundai getz. If it is a bulb on your rear turn signal, see our dedicated content page. On the other hand, here are the details of the steps to stick to in order to carry out this action properly dependant on the technique you wish to adopt.

Replace front turn signal bulb on your hyundai getz through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your hyundai getz by the new one (ensure to check if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb is effective.

    • Replace the front turn signal bulb of your hyundai getz through the wheel arch:

    This tactic is extremely valuable when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Change the front turn signal bulb of your hyundai getz through the bumper:

    On some years or finishes, based on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will detail them right now:

    • Put your hyundai getz on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be fragile.
    • Take away your headlight block and replace the front turn indicator bulb of your hyundai getz following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    If you need more tutorials on the hyundai getz, go to our hyundai getz category.