It doesn’t matter if for your personal security, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always functional is necessary. In fact, bulbs are wearing parts that will undoubtedly burn out over time and therefore need to be changed. You’re most likely on this website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Ford Mondeo 4, we’ve written and published this content page to help you do it all on your own and not have to go to your technician. In a first step, we will examine the checking a burnt-out front turn signal bulb on your Ford Mondeo 4 and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-ford-mondeo-4

How to discover if the front turn signal bulb on your Ford Mondeo 4 is burnt out or needs to be swapped out?

When you drive your car you don’t constantly have the opportunity to verify all the security equipments of your Ford Mondeo 4. In fact, you are in many cases in a hurry and tend to enter into your car, make your trip and put it down immediately without taking the time to do an occasional check-up. It is therefore relevant to take the time to sometimes verify the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Ford Mondeo 4, but that you didn’t realize it. Here are the two simple solutions to control if a front turn signal is burnt out or if you need to swap it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are functioning.
  • By listening to the sound of your blinkers. In fact, there is an audible signal on each car that signals you of a front turn indicator bulb burnt out on your Ford Mondeo 4, you will recognise that the time between each “click” is much closer, this denotes that you will have to replace the front turn signal bulb or before. It’s up to you to verify and examine which one is burnt out by a visual control as on the first process shown above.

You may have an additional bulb to swap, like the one of your low beam or your position lights, don’t be reluctant to consult our blog posts to help you to perform this replacing.

Replacing the front turn signal bulb on your Ford Mondeo 4

Now let’s go to the most important step of this content page, how to replace the front turn signal bulb of your Ford Mondeo 4? Please note that this procedure is fairly simple, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Ford Mondeo 4. If it is a bulb on your rear turn signal, see our dedicated content page. On the other hand, here are the details of the actions to follow in order to perform this act accurately dependant on the approach you want to adopt.

Replace front turn signal bulb on your Ford Mondeo 4 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Ford Mondeo 4 by the new one (make sure to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb operates.

    • Replace the front turn signal bulb of your Ford Mondeo 4 through the wheel arch:

    This approach is specially useful when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Change the front turn signal bulb of your Ford Mondeo 4 through the bumper:

    On some years or finishes, based on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will describe them now:

    • Put your Ford Mondeo 4 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be breakable.
    • Take out your headlight block and swap the front turn indicator bulb of your Ford Mondeo 4 following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    If you want more tutorials on the Ford Mondeo 4, go to our Ford Mondeo 4 category.