Regardless for your personal safety, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always operational is important. In reality, bulbs are wearing parts that will surely burn out with time and as a result need to be replaced. You’re almost certainly on the website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Ford Ka, we’ve made this article to help you do it without hiring somebody and not have to go to your auto mechanic. In a first part, we will examine controling a burnt-out front turn signal bulb on your Ford Ka and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-ford-ka

How to discover if the front turn signal bulb on your Ford Ka is burnt out or needs to be replaced?

When you drive your vehicle you don’t constantly have the opportunity to verify all the safety features of your Ford Ka. In reality, you are in general in a hurry and tend to get into your vehicle, make your journey and put it down right away without taking the time to do an regular check-up. It is as a consequence crucial to take the time to in some cases verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Ford Ka, but that you didn’t realize it. Here are the two simple solutions to verify if a front turn signal is burnt out or if you need to swap it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are working.
  • By hearing to the sound of your blinkers. In reality, there is an audible sign on each car that informs you of a front turn indicator bulb burnt out on your Ford Ka, you will find out that the time between each “click” is much closer, this denotes that you will have to swap the front turn signal bulb or before. It’s up to you to verify and examine which one is burnt out by a visual verify as on the first methodology shown earlier mentioned.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t be reluctant to consult our content articles to help you to do this replacement.

Changing the front turn signal bulb on your Ford Ka

Now let’s go to the most important part of this article, how to replace the front turn signal bulb of your Ford Ka? Take note that this technique is quite simple, you will require to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Ford Ka. If it is a bulb on your rear turn signal, see our special article. However, here are the details of the actions to follow in order to execute this act properly according to the method you want to adopt.

Change front turn signal bulb on your Ford Ka through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Ford Ka by the new one (ensure to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb works.

    • Change the front turn signal bulb of your Ford Ka through the wheel arch:

    This tactic is specifically effective when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Change the front turn signal bulb of your Ford Ka through the bumper:

    On some years or finishes, based on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will describe them now:

    • Put your Ford Ka on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be delicate.
    • Remove your headlight block and swap the front turn indicator bulb of your Ford Ka following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If you want more tutorials on the Ford Ka, go to our Ford Ka category.