Regardless for your personal safety, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always working is very important. In fact, bulbs are wearing parts that will undoubtedly burn out after awhile and therefore need to be changed. You’re almost certainly here because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Hyundai Ix35, we’ve written this content to help you do it on your own and not have to go to your repair shop. In a first part, we will examine controling a burnt-out front turn signal bulb on your Hyundai Ix35 and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-hyundai-ix35

How to recognise if the front turn signal bulb on your Hyundai Ix35 is burnt out or needs to be swapped out?

When you drive your automobile you don’t constantly have the opportunity to examine all the safety equipments of your Hyundai Ix35. In fact, you are often in a rush and tend to enter into your automobile, make your journey and put it down right away without taking the time to do an regular check-up. It is consequently crucial to take the time to once in a while examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Hyundai Ix35, but that you didn’t notice it. Here are the two simple techniques to check if a front turn signal is burnt out or if you need to replace it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are operational.
  • By listening to the sound of your blinkers. In fact, there is an audible signal on each car that alerts you of a front turn indicator bulb burnt out on your Hyundai Ix35, you will identify that the time between each “click” is much closer, this suggests that you will have to change the front turn signal bulb or before. It’s up to you to examine and check out which one is burnt out by a visual check as on the first process shown above.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t hesitate to browse our articles to help you to perform this replacement.

Replacing the front turn signal bulb on your Hyundai Ix35

Now let’s go to the main part of this content, how to change the front turn signal bulb of your Hyundai Ix35? Please note that this technique is quite easy, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Hyundai Ix35. If it is a bulb on your rear turn signal, see our dedicated content. Nevertheless, here are the details of the simple steps to stick to in order to execute this action properly according to the solution you wish to adopt.

Replace front turn signal bulb on your Hyundai Ix35 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Hyundai Ix35 by the new one (be sure to examine if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb works.

    • Replace the front turn signal bulb of your Hyundai Ix35 through the wheel arch:

    This tactic is in particular effective when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same guidelines as on the part previously seen.

    Change the front turn signal bulb of your Hyundai Ix35 through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will point them right now:

    • Put your Hyundai Ix35 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be breakable.
    • Remove your headlight block and replace the front turn indicator bulb of your Hyundai Ix35 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    To discover more tips on the Hyundai Ix35, take a look at the Hyundai Ix35 category.