Whether for your personal safety, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always functional is imperative. In fact, bulbs are wearing parts that will obviously burn out in the future and as a consequence need to be swapped out. You’re perhaps in this article because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Ford Crown Victoria, we’ve written this article to help you do it on your own and not have to go to your auto mechanic. In a first section, we will look at the checking a burnt-out front turn signal bulb on your Ford Crown Victoria and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-ford-crown-victoria

How to discover if the front turn signal bulb on your Ford Crown Victoria is burnt out or needs to be swapped out?

When you drive your vehicle you don’t constantly have the opportunity to verify all the safety features of your Ford Crown Victoria. In fact, you are nearly always in a rush and tend to get into your vehicle, make your journey and put it down instantly without taking the time to do an regular check-up. It is consequently fundamental to take the time to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Ford Crown Victoria, but that you didn’t notice it. Here are the two simple methods to control if a front turn signal is burnt out or if you need to change it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are operational.
  • By hearing to the sound of your blinkers. In fact, there is an audible indication on each car that alerts you of a front turn indicator bulb burnt out on your Ford Crown Victoria, you will recognise that the time between each “click” is much shorter, this suggests that you will have to swap the front turn signal bulb or before. It’s up to you to verify and check which one is burnt out by a visual control as on the first methodology shown earlier mentioned.

You may have another bulb to change, like the one of your low beam or your position lights, don’t hesitate to read our blog posts to help you to achieve this substitution.

Replacing the front turn signal bulb on your Ford Crown Victoria

Now let’s go to the most significant section of this article, how to change the front turn signal bulb of your Ford Crown Victoria? You should be aware that this technique is uncomplicated, you will need to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Ford Crown Victoria. If it is a bulb on your rear turn signal, see our specific article. However, here are the details of the actions to stick to in order to perform this action accurately dependant on the strategy you wish to choose.

Change front turn signal bulb on your Ford Crown Victoria through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Ford Crown Victoria by the new one (make certain to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb functions.

    • Change the front turn signal bulb of your Ford Crown Victoria through the wheel arch:

    This tactic is in particular effective when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Change the front turn signal bulb of your Ford Crown Victoria through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will explain them now:

    • Put your Ford Crown Victoria on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be breakable.
    • Take off your headlight block and change the front turn indicator bulb of your Ford Crown Victoria following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If perhaps you have any further questions about the Ford Crown Victoria, do not hesitate to consult our Ford Crown Victoria category.