Whether for your own security, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always functional is very important. In fact, bulbs are wearing parts that will predictably burn out after a while and as a consequence need to be swapped out. You’re probably on the website because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Fiat 500 X, we’ve created this content to help you do it all on your own and not have to go to your technician. In a first step, we will have a look at the checking a burnt-out front turn signal bulb on your Fiat 500 X and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-fiat-500-x

How to know if the front turn signal bulb on your Fiat 500 X is burnt out or needs to be swapped out?

When you drive your motor vehicle you don’t always have the opportunity to verify all the security equipments of your Fiat 500 X. In fact, you are often in a hurry and tend to enter into your motor vehicle, make your journey and put it down right away without taking the time to do an regular check-up. It is as a consequence essential to take the time to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Fiat 500 X, but that you didn’t detect it. Here are the two simple techniques to examine if a front turn signal is burnt out or if you need to replace it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are operational.
  • By hearing to the sound of your blinkers. In fact, there is an audible indicator on each car that signals you of a front turn indicator bulb burnt out on your Fiat 500 X, you will perceive that the time between each “click” is much shorter, this suggests that you will have to change the front turn signal bulb or before. It’s up to you to verify and check out which one is burnt out by a visual examine as on the first process shown earlier mentioned.

You may have an additional bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to read our articles to help you to accomplish this substitution.

Changing the front turn signal bulb on your Fiat 500 X

Now let’s go to the most significant step of this content, how to replace the front turn signal bulb of your Fiat 500 X? Take note that this procedure is fairly simple, you will have to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Fiat 500 X. If it is a bulb on your rear turn signal, see our special content. However, here are the details of the guidelines to stick to to be able to conduct this act correctly according to the method you want to adopt.

Replace front turn signal bulb on your Fiat 500 X through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Fiat 500 X by the new one (ensure to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb works.

    • Replace the front turn signal bulb of your Fiat 500 X through the wheel arch:

    This procedure is extremely useful when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Replace the front turn signal bulb of your Fiat 500 X through the bumper:

    On some years or finishes, based on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will detail them right now:

    • Put your Fiat 500 X on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be delicate.
    • Take out your headlight block and replace the front turn indicator bulb of your Fiat 500 X following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you wish more guides on the Fiat 500 X, go to our Fiat 500 X category.