Regardless whether for your personal safety, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always functioning is very important. In fact, bulbs are wearing parts that will surely burn out after a while and as a result need to be replaced. You’re most likely on the website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Citroen Jumpy 2, we’ve made this article content to help you do it on your own and not have to go to your auto mechanic. In a first part, we will examine controling a burnt-out front turn signal bulb on your Citroen Jumpy 2 and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-citroen-jumpy-2

How to discover if the front turn signal bulb on your Citroen Jumpy 2 is burnt out or needs to be swapped out?

When you drive your vehicle you don’t constantly have the opportunity to verify all the safety equipments of your Citroen Jumpy 2. In fact, you are mostly in a hurry and tend to enter into your vehicle, make your journey and put it down right away without taking the time to do an regular check-up. It is as a consequence crucial to take the time to occasionally verify the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Citroen Jumpy 2, but that you didn’t detect it. Here are the two simple methods to verify if a front turn signal is burnt out or if you need to swap it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are working.
  • By listening to the sound of your blinkers. In fact, there is an audible indication on each car that alerts you of a front turn indicator bulb burnt out on your Citroen Jumpy 2, you will notice that the time between each “click” is much closer, this means that you will have to replace the front turn signal bulb or before. It’s up to you to verify and check which one is burnt out by a visual verify as on the first solution shown earlier mentioned.

You may have an additional bulb to swap, like the one of your low beam or your position lights, don’t be reluctant to read our content articles to help you to perform this replacing.

Changing the front turn signal bulb on your Citroen Jumpy 2

Now let’s go to the main part of this article content, how to replace the front turn signal bulb of your Citroen Jumpy 2? Please be aware that this procedure is quite easy, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Citroen Jumpy 2. If it is a bulb on your rear turn signal, see our specific article content. On the other hand, here are the details of the guidelines to follow in order to execute this act correctly depending on the method you want to adopt.

Replace front turn signal bulb on your Citroen Jumpy 2 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Citroen Jumpy 2 by the new one (make sure to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb works.

    • Replace the front turn signal bulb of your Citroen Jumpy 2 through the wheel arch:

    This methodology is extremely useful when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same steps as on the part previously seen.

    Change the front turn signal bulb of your Citroen Jumpy 2 through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will detail them now:

    • Put your Citroen Jumpy 2 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be breakable.
    • Take away your headlight block and swap the front turn indicator bulb of your Citroen Jumpy 2 following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If you wish more tutorials on the Citroen Jumpy 2, go to our Citroen Jumpy 2 category.