Regardless for your personal security, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always functional is extremely important. In fact, bulbs are wearing parts that will definitely burn out after a while and as a consequence need to be replaced. You’re probably here because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Chevrolet Suburban, we’ve written and published this article to help you do it by yourself and not have to go to your auto technician. In a first section, we will have a look at controling a burnt-out front turn signal bulb on your Chevrolet Suburban and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-chevrolet-suburban

How to recognise if the front turn signal bulb on your Chevrolet Suburban is burnt out or needs to be changed?

When you drive your car you don’t constantly have the opportunity to examine all the security components of your Chevrolet Suburban. In fact, you are nearly always in a rush and tend to enter into your car, make your trip and put it down immediately without taking the time to do an periodic check-up. It is therefore essential to take the time to occasionally examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Chevrolet Suburban, but that you didn’t detect it. Here are the two simple techniques to examine if a front turn signal is burnt out or if you need to change it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are functional.
  • By listening to the sound of your blinkers. In fact, there is an audible indication on each car that warns you of a front turn indicator bulb burnt out on your Chevrolet Suburban, you will identify that the time between each “click” is much shorter, this denotes that you will have to change the front turn signal bulb or before. It’s up to you to examine and make sure which one is burnt out by a visual examine as on the first technique shown above.

You may have another bulb to change, like the one of your low beam or your position lights, don’t hesitate to read our content articles to help you to achieve this substitution.

Replacing the front turn signal bulb on your Chevrolet Suburban

Now let’s go to the most essential section of this article, how to change the front turn signal bulb of your Chevrolet Suburban? Please be aware that this operation is really easy, you will have to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Chevrolet Suburban. If it is a bulb on your rear turn signal, see our special article. Nevertheless, here are the details of the simple steps to follow to be able to conduct this act efficiently dependant on the solution you wish to choose.

Replace front turn signal bulb on your Chevrolet Suburban through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Chevrolet Suburban by the new one (make sure to examine if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb is effective.
  • Replace the front turn signal bulb of your Chevrolet Suburban through the wheel arch:

    This methodology is particularly useful when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same steps as on the part previously seen.

    Replace the front turn signal bulb of your Chevrolet Suburban through the bumper:

    On some years or finishes, based on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will detail them right now:

    • Put your Chevrolet Suburban on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be breakable.
    • Take out your headlight block and change the front turn indicator bulb of your Chevrolet Suburban following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    To find more tips on the Chevrolet Suburban, take a look at the Chevrolet Suburban category.