Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one component of your car at fault – your headlights, also often known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this post, we are going to see how to adjust the headlights of your Volkswagen Up!? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Up!.
Why adjust the headlights of your Volkswagen Up!?
So let’s begin our content page with the interest of adjusting the headlights of your Volkswagen Up!. For most people, our headlights are adjusted well enough, and they appear to light up enough at night. Sadly this is not always the case and examining this setting, either because the headlights on your Volkswagen Up! are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Volkswagen Up! for safety
First of all, the headlight adjustment of a Volkswagen Up! must be carried out for a basic security explanation. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle on your way, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Volkswagen Up! . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Up! for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Up!?
We will now go forward to the section that interests you the most in this post, how to adjust the headlights of his Volkswagen Up!? This setting might seem a bit complicated, but by simply following the guidelines you should be able to perform it without too much problem.
Preparations to adjust the headlights of a Volkswagen Up!
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Up!
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Volkswagen Up! (they are in most cases designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Volkswagen Up! is coherent, do not hesitate to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Up!, please read our content page on this subject.
Whenever you have any additional questions about the Volkswagen Up!, do not hesitate to consult our Volkswagen Up! category.
