If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car at fault – your headlights, also identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your Volkswagen Transporter 4? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Transporter 4.
Why adjust the headlights of your Volkswagen Transporter 4?
So let’s begin our article with the benefit of adjusting the headlights of your Volkswagen Transporter 4. For most people, our headlights are adjusted good enough, and they seem to light up enough after dark. Regrettably this is not always the case and examining this setting, either because the headlights on your Volkswagen Transporter 4 are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Volkswagen Transporter 4 for safety
To begin with, the headlight adjustment of a Volkswagen Transporter 4 must be carried out for a simple safety reason. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to ignore an obstacle while traveling, or to anticipate a curve badly. On the other hand, if your headlights are too strong, even if you are supposed to switch to low beam lights when you cross a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Volkswagen Transporter 4 . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Transporter 4 for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Transporter 4?
We will now move on to the section that interests you the most in this post, how to adjust the headlights of his Volkswagen Transporter 4? This setting may appear a bit complicated, but by following the guidance you should have the ability to do it without too much problem.
Preparations to adjust the headlights of a Volkswagen Transporter 4
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Transporter 4
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical control of the headlights of your Volkswagen Transporter 4 (they are in general marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Volkswagen Transporter 4 is coherent, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Transporter 4, please go through our article on this subject.
To find more tips on the Volkswagen Transporter 4, take a look at the Volkswagen Transporter 4 category.
