Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle to blame – your headlights, also called high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this article, we are going to see how to adjust the headlights of your Volkswagen Lupo? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Lupo.
Why adjust the headlights of your Volkswagen Lupo?
So let’s start our content with the interest of adjusting the headlights of your Volkswagen Lupo. For the majority of us, our headlights are adjusted well enough, and they appear to light up enough through the night. However this is not always the circumstance and checking this setting, either because the headlights on your Volkswagen Lupo are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Volkswagen Lupo for safety
To begin with, the headlight adjustment of a Volkswagen Lupo must be achieved for a simple safety reason. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. However, if your headlights are too powerful, even if you are expected to switch to low beam lights when you pass a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Volkswagen Lupo . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Lupo for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Lupo?
We will now go forward to the section that concerns you the most in this article, how to adjust the headlights of his Volkswagen Lupo? This setting may appear a bit complicated, but by simply following the guidance you should have the ability to do it without too much problem.
Preparations to adjust the headlights of a Volkswagen Lupo
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Lupo
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, identify the screws for horizontal and vertical modification of the headlights of your Volkswagen Lupo (they are usually designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Volkswagen Lupo is coherent, do not think twice to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Lupo, please go through our content on this subject matter.
If you want more tutorials on the Volkswagen Lupo, go to our Volkswagen Lupo category.
