If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your car to take responsibility – your headlights, as well identified as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this article, we are going to see how to adjust the headlights of your Volkswagen Golf 3? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Golf 3.

adjust-headlights-volkswagen-golf-3

Why adjust the headlights of your Volkswagen Golf 3?

So let’s begin our content page with the benefit of adjusting the headlights of your Volkswagen Golf 3. For the majority of us, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. Unfortunately this is not constantly the circumstance and examining this setting, either because the headlights on your Volkswagen Golf 3 are not bright enough, or because you have the feeling that they are too weak is a wise decision .

Adjusting the high beams of your Volkswagen Golf 3 for safety

First of all, the headlight adjustment of a Volkswagen Golf 3 must be carried out for a simple safety explanation. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to ignore an obstacle while traveling, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Volkswagen Golf 3 . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Volkswagen Golf 3 for legal reasons

In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Volkswagen Golf 3?

We will now proceed to the section that interests you the most in this article, how to adjust the headlights of his Volkswagen Golf 3? This adjustment might seem a bit complex, but by following the recommendations you should have the ability to accomplish it without too much problem.

Preparations to adjust the headlights of a Volkswagen Golf 3

First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure cautiously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the car, just one person should be in the driver’s seat.

The headlight adjustment of his Volkswagen Golf 3

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your hood, identify the screws for horizontal and vertical modification of the headlights of your Volkswagen Golf 3 (they are in general designated, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the headlights setting of your Volkswagen Golf 3 is logical, do not think twice to verify it after you have driven it, occasionally it may move.

.
If you want to adjust the fog lights on your Volkswagen Golf 3, please go through our content page on this subject.

In the event that you have any additional questions about the Volkswagen Golf 3, do not hesitate to consult our Volkswagen Golf 3 category.