If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one part of your car to take responsibility – your headlights, as well known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this post, we are going to see how to adjust the headlights of your Volkswagen CC? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen CC.
Why adjust the headlights of your Volkswagen CC?
So let’s start our article with the benefit of adjusting the headlights of your Volkswagen CC. For many of us, our headlights are adjusted sufficiently, and they appear to light up enough through the night. However this is not always the case and looking at this setting, either because the headlights on your Volkswagen CC are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Volkswagen CC for safety
First of all, the headlight adjustment of a Volkswagen CC must be done for a very easy safety motive. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle while traveling, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are meant to switch to low beam lights when you pass a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Volkswagen CC . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Volkswagen CC for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen CC?
We will now go forward to the part that interests you the most in this post, how to adjust the headlights of his Volkswagen CC? This setting might seem a bit complex, but by following the guidance you should be able to accomplish it without too much problem.
Preparations to adjust the headlights of a Volkswagen CC
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen CC
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your Volkswagen CC (they are in general marked, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Volkswagen CC is logical, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Volkswagen CC, please go through our article on this subject.
If you have any additional questions about the Volkswagen CC, do not hesitate to consult our Volkswagen CC category.
