If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle to blame – your headlights, also called high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Volkswagen Caddy 3? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Caddy 3.
Why adjust the headlights of your Volkswagen Caddy 3?
So let’s start our content with the benefit of adjusting the headlights of your Volkswagen Caddy 3. For many people, our headlights are adjusted sufficiently, and they seem to light up enough at night. However this is not always the case and looking at this setting, either because the headlights on your Volkswagen Caddy 3 are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Volkswagen Caddy 3 for safety
To begin with, the headlight adjustment of a Volkswagen Caddy 3 must be carried out for a very easy safety motive. If it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to ignore an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, even if you are meant to switch to low beam lights when you cross a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Volkswagen Caddy 3 . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Caddy 3 for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Caddy 3?
We will now go forward to the section that interests you the most in this post, how to adjust the headlights of his Volkswagen Caddy 3? This adjustment may appear a bit complex, but by simply following the guidelines you should have the ability to accomplish it without too much issue.
Preparations to adjust the headlights of a Volkswagen Caddy 3
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Caddy 3
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your Volkswagen Caddy 3 (they are in general designated, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Volkswagen Caddy 3 is coherent, do not hesitate to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Caddy 3, please go through our content on this subject.
In the event that you have any further questions about the Volkswagen Caddy 3, do not hesitate to consult our Volkswagen Caddy 3 category.
