If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your car guilty – your headlights, also often known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Volkswagen Amarok? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Amarok.
Why adjust the headlights of your Volkswagen Amarok?
So let’s start our content page with the interest of adjusting the headlights of your Volkswagen Amarok. For many people, our headlights are adjusted good enough, and they seem to light up enough at nighttime. Unfortunately this is not always the circumstance and examining this setting, either because the headlights on your Volkswagen Amarok are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Volkswagen Amarok for safety
To begin with, the headlight adjustment of a Volkswagen Amarok must be done for a very easy safety reason. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle while traveling, or to anticipate a curve badly. However, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you pass a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Volkswagen Amarok . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Amarok for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Amarok?
We will now go forward to the section that interests you the most in this post, how to adjust the headlights of his Volkswagen Amarok? This setting may appear a bit complicated, but by following the guidance you should have the ability to do it without too much problem.
Preparations to adjust the headlights of a Volkswagen Amarok
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Amarok
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Volkswagen Amarok (they are generally marked, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Volkswagen Amarok is coherent, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Amarok, please go through our content page on this subject matter.
If you wish more tutorials on the Volkswagen Amarok, go to our Volkswagen Amarok category.
