If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your car guilty – your headlights, as well named high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this post, we are going to find out how to adjust the headlights of your Toyota Yaris 2? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Yaris 2.
Why adjust the headlights of your Toyota Yaris 2?
So let’s begin our content with the benefit of adjusting the headlights of your Toyota Yaris 2. For most of us, our headlights are adjusted well enough, and they appear to light up enough after dark. However this is not always the case and looking at this setting, either because the headlights on your Toyota Yaris 2 are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Toyota Yaris 2 for safety
First of all, the headlight adjustment of a Toyota Yaris 2 must be carried out for a simple security motive. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle on your way, or to predict a curve badly. However, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you cross a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Toyota Yaris 2 . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Toyota Yaris 2 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Yaris 2?
We will now proceed to the part that interests you the most in this post, how to adjust the headlights of his Toyota Yaris 2? This setting may seem a bit complicated, but by simply following the guidance you should be able to accomplish it without too much trouble.
Preparations to adjust the headlights of a Toyota Yaris 2
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Yaris 2
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Toyota Yaris 2 (they are in general designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Toyota Yaris 2 is logical, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Toyota Yaris 2, please browse our content on this subject matter.
In the event that you have any additional questions about the Toyota Yaris 2, do not hesitate to consult our Toyota Yaris 2 category.
