Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car responsible – your headlights, also known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Toyota Corolla Verso? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Corolla Verso.
Why adjust the headlights of your Toyota Corolla Verso?
So let’s start our article with the interest of adjusting the headlights of your Toyota Corolla Verso. For most of us, our headlights are adjusted good enough, and they seem to light up enough after dark. Regrettably this is not always the circumstance and looking at this setting, either because the headlights on your Toyota Corolla Verso are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Toyota Corolla Verso for safety
First of all, the headlight adjustment of a Toyota Corolla Verso must be done for a simple security motive. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too strong, even if you are supposed to switch to low beam lights when you pass a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Toyota Corolla Verso . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Toyota Corolla Verso for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Corolla Verso?
We will now go forward to the section that concerns you the most in this post, how to adjust the headlights of his Toyota Corolla Verso? This setting may seem a bit complex, but by following the guidelines you should be able to accomplish it without too much trouble.
Preparations to adjust the headlights of a Toyota Corolla Verso
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Corolla Verso
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Toyota Corolla Verso (they are in most cases marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Toyota Corolla Verso is logical, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Toyota Corolla Verso, please read our article on this subject matter.
To find more tips on the Toyota Corolla Verso, take a look at the Toyota Corolla Verso category.
