Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your car to take responsibility – your headlights, as well known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this post, we are going to see how to adjust the headlights of your Toyota Rav 4? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Rav 4.
Why adjust the headlights of your Toyota Rav 4?
So let’s start our content page with the benefit of adjusting the headlights of your Toyota Rav 4. For most of us, our headlights are adjusted well enough, and they seem to light up enough through the night. Unfortunately this is not constantly the circumstance and looking at this setting, either because the headlights on your Toyota Rav 4 are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Toyota Rav 4 for safety
To begin with, the headlight adjustment of a Toyota Rav 4 must be made for a very easy security reason. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, even if you are meant to switch to low beam lights when you cross a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Toyota Rav 4 . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Toyota Rav 4 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Rav 4?
We will now go forward to the part that interests you the most in this post, how to adjust the headlights of his Toyota Rav 4? This adjustment may seem a bit difficult, but by simply following the guidelines you should be able to complete it without too much concern.
Preparations to adjust the headlights of a Toyota Rav 4
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Rav 4
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, identify the screws for horizontal and vertical control of the headlights of your Toyota Rav 4 (they are generally designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Toyota Rav 4 is coherent, do not think twice to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Toyota Rav 4, please read our content page on this subject matter.
If perhaps you have any additional questions about the Toyota Rav 4, do not hesitate to consult our Toyota Rav 4 category.
