If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your car responsible – your headlights, also identified as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Tesla Model S? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Tesla Model S.
Why adjust the headlights of your Tesla Model S?
So let’s begin our content with the benefit of adjusting the headlights of your Tesla Model S. For most people, our headlights are adjusted good enough, and they appear to light up enough through the night. Regrettably this is not always the case and examining this setting, either because the headlights on your Tesla Model S are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Tesla Model S for safety
First of all, the headlight adjustment of a Tesla Model S must be conducted for a very easy safety motive. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to ignore an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Tesla Model S . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Tesla Model S for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Tesla Model S?
We will now go forward to the part that interests you the most in this post, how to adjust the headlights of his Tesla Model S? This setting may appear a bit complicated, but by following the guidelines you should have the ability to do it without too much trouble.
Preparations to adjust the headlights of a Tesla Model S
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Tesla Model S
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Tesla Model S (they are in general designated, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Tesla Model S is logical, do not hesitate to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Tesla Model S, please go through our content on this subject.
If you wish more guides on the Tesla Model S, go to our Tesla Model S category.
