Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your car guilty – your headlights, also named high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this post, we are going to see how to adjust the headlights of your Suzuki Jimny? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Suzuki Jimny.
Why adjust the headlights of your Suzuki Jimny?
So let’s start our article with the interest of adjusting the headlights of your Suzuki Jimny. For the majority of us, our headlights are adjusted well enough, and they seem to light up enough after dark. Unfortunately this is not always the case and checking this setting, either because the headlights on your Suzuki Jimny are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Suzuki Jimny for safety
First of all, the headlight adjustment of a Suzuki Jimny must be finished for a simple safety explanation. If it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle driving, or to predict a curve badly. However, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you pass a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Suzuki Jimny . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Suzuki Jimny for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Suzuki Jimny?
We will now move on to the part that interests you the most in this post, how to adjust the headlights of his Suzuki Jimny? This setting may appear a bit difficult, but by simply following the recommendations you should be able to perform it without too much problem.
Preparations to adjust the headlights of a Suzuki Jimny
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Suzuki Jimny
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Suzuki Jimny (they are usually marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Suzuki Jimny is logical, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Suzuki Jimny, please browse our article on this subject.
If you need more tutorials on the Suzuki Jimny, go to our Suzuki Jimny category.
