Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car responsible – your headlights, also known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Suzuki Alto? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Suzuki Alto.
Why adjust the headlights of your Suzuki Alto?
So let’s start our article with the interest of adjusting the headlights of your Suzuki Alto. For most of us, our headlights are adjusted sufficiently, and they appear to light up enough during the night. Unfortunately this is not always the case and checking this setting, either because the headlights on your Suzuki Alto are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Suzuki Alto for safety
First of all, the headlight adjustment of a Suzuki Alto must be achieved for a very easy security motive. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. On the other hand, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you cross a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Suzuki Alto . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Suzuki Alto for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Suzuki Alto?
We will now go forward to the section that concerns you the most in this article, how to adjust the headlights of his Suzuki Alto? This setting may appear a bit complicated, but by following the recommendations you should have the ability to do it without too much concern.
Preparations to adjust the headlights of a Suzuki Alto
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Suzuki Alto
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Suzuki Alto (they are generally designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Suzuki Alto is coherent, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Suzuki Alto, please go through our article on this subject.
In the event that you have any additional questions about the Suzuki Alto, do not hesitate to consult our Suzuki Alto category.
