If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car guilty – your headlights, as well named high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this post, we are going to find out how to adjust the headlights of your Subaru Crosstrek? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Subaru Crosstrek.


Why adjust the headlights of your Subaru Crosstrek?

So let’s begin our content with the benefit of adjusting the headlights of your Subaru Crosstrek. For many of us, our headlights are adjusted good enough, and they seem to light up enough at nighttime. Unfortunately this is not constantly the circumstance and checking this setting, either because the headlights on your Subaru Crosstrek are not bright enough, or because you have the sensation that they are too weak is a great idea .

Adjusting the high beams of your Subaru Crosstrek for safety

First of all, the headlight adjustment of a Subaru Crosstrek must be made for a simple security motive. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss out an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you cross a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Subaru Crosstrek . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Subaru Crosstrek for legal reasons

Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Subaru Crosstrek?

We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Subaru Crosstrek? This setting might seem a bit difficult, but by following the instructions you should have the ability to accomplish it without too much trouble.

Preparations to adjust the headlights of a Subaru Crosstrek

First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure attentively.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.

The headlight adjustment of his Subaru Crosstrek

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:

  • Open your hood, identify the screws for horizontal and vertical adjustment of the headlights of your Subaru Crosstrek (they are in general marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
  • Use a cloth or another thing to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, check that the headlights setting of your Subaru Crosstrek is logical, do not think twice to check it after you have driven it, oftentimes it may move.

If you want to adjust the fog lights on your Subaru Crosstrek, please go through our content on this subject.

If you wish more tutorials on the Subaru Crosstrek, go to our Subaru Crosstrek category.