If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle responsible – your headlights, also identified as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Seat Ateca? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Seat Ateca.
Why adjust the headlights of your Seat Ateca?
So let’s begin our content page with the interest of adjusting the headlights of your Seat Ateca. For most people, our headlights are adjusted well enough, and they seem to light up enough at nighttime. However this is not always the circumstance and checking this setting, either because the headlights on your Seat Ateca are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Seat Ateca for safety
To begin with, the headlight adjustment of a Seat Ateca must be carried out for a basic safety motive. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you cross a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Seat Ateca . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Seat Ateca for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Seat Ateca?
We will now move on to the part that interests you the most in this post, how to adjust the headlights of his Seat Ateca? This setting may seem a bit complex, but by simply following the instructions you should have the ability to do it without too much concern.
Preparations to adjust the headlights of a Seat Ateca
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Seat Ateca
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, identify the screws for horizontal and vertical control of the headlights of your Seat Ateca (they are in most cases designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Seat Ateca is coherent, do not think twice to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Seat Ateca, please go through our content page on this subject matter.
To get more tips on the Seat Ateca, take a look at the Seat Ateca category.
