If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car to take responsibility – your headlights, also identified as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Scion xB? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Scion xB.
Why adjust the headlights of your Scion xB?
So let’s start our article with the benefit of adjusting the headlights of your Scion xB. For many people, our headlights are adjusted good enough, and they appear to light up enough during the night. Unfortunately this is not always the case and looking at this setting, either because the headlights on your Scion xB are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Scion xB for safety
To begin with, the headlight adjustment of a Scion xB must be carried out for a basic safety explanation. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. However, if your headlights are too strong, even if you are expected to switch to low beam lights when you cross a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Scion xB . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Scion xB for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Scion xB?
We will now move on to the section that interests you the most in this post, how to adjust the headlights of his Scion xB? This adjustment might seem a bit complex, but by following the guidance you should have the ability to do it without too much problem.
Preparations to adjust the headlights of a Scion xB
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Scion xB
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Scion xB (they are in most cases marked, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Scion xB is logical, do not think twice to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Scion xB, please read our article on this subject matter.
In the event that you have any additional questions about the Scion xB, do not hesitate to consult our Scion xB category.
