Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your vehicle to blame – your headlights, as well named high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Scion tC? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Scion tC.
Why adjust the headlights of your Scion tC?
So let’s begin our content with the benefit of adjusting the headlights of your Scion tC. For most people, our headlights are adjusted good enough, and they appear to light up enough during the night. However this is not constantly the case and looking at this setting, either because the headlights on your Scion tC are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Scion tC for safety
First of all, the headlight adjustment of a Scion tC must be achieved for a simple security motive. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. However, if your headlights are too powerful, even if you are expected to switch to low beam lights when you cross a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Scion tC . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Scion tC for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Scion tC?
We will now move on to the section that concerns you the most in this article, how to adjust the headlights of his Scion tC? This setting may appear a bit complicated, but by following the recommendations you should have the ability to do it without too much trouble.
Preparations to adjust the headlights of a Scion tC
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Scion tC
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Scion tC (they are usually marked, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Scion tC is coherent, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Scion tC, please browse our content on this subject.
If perhaps you have any additional questions about the Scion tC, do not hesitate to consult our Scion tC category.
