If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your car at fault – your headlights, also called high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Renault Megane? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Renault Megane.
Why adjust the headlights of your Renault Megane?
So let’s begin our content page with the interest of adjusting the headlights of your Renault Megane. For most people, our headlights are adjusted good enough, and they seem to light up enough after dark. However this is not constantly the case and checking this setting, either because the headlights on your Renault Megane are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Renault Megane for safety
First of all, the headlight adjustment of a Renault Megane must be carried out for a very easy security motive. If it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle while traveling, or to anticipate a curve badly. Alternatively, if your headlights are too strong, even if you are meant to switch to low beam lights when you pass a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Renault Megane . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Renault Megane for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Renault Megane?
We will now go forward to the part that concerns you the most in this post, how to adjust the headlights of his Renault Megane? This adjustment might seem a bit complex, but by simply following the recommendations you should be able to accomplish it without too much issue.
Preparations to adjust the headlights of a Renault Megane
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Renault Megane
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Renault Megane (they are in most cases designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Renault Megane is coherent, do not think twice to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Renault Megane, please go through our content page on this subject matter.
If you want more guides on the Renault Megane, go to our Renault Megane category.
