If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car at fault – your headlights, also named high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Mitsubishi Pajero 3? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Mitsubishi Pajero 3.
Why adjust the headlights of your Mitsubishi Pajero 3?
So let’s start our article with the benefit of adjusting the headlights of your Mitsubishi Pajero 3. For most of us, our headlights are adjusted well enough, and they appear to light up enough through the night. Sadly this is not always the circumstance and checking this setting, either because the headlights on your Mitsubishi Pajero 3 are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Mitsubishi Pajero 3 for safety
To begin with, the headlight adjustment of a Mitsubishi Pajero 3 must be finished for a very easy security explanation. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too strong, even if you are supposed to switch to low beam lights when you cross a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Mitsubishi Pajero 3 . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Mitsubishi Pajero 3 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mitsubishi Pajero 3?
We will now go forward to the part that concerns you the most in this article, how to adjust the headlights of his Mitsubishi Pajero 3? This adjustment may seem a bit difficult, but by simply following the instructions you should be able to perform it without too much problem.
Preparations to adjust the headlights of a Mitsubishi Pajero 3
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Mitsubishi Pajero 3
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the headlights of your Mitsubishi Pajero 3 (they are generally marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Mitsubishi Pajero 3 is coherent, do not think twice to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Mitsubishi Pajero 3, please read our article on this subject matter.
To find more tips on the Mitsubishi Pajero 3, take a look at the Mitsubishi Pajero 3 category.
