If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your car to take responsibility – your headlights, also often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your skoda octavia? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your skoda octavia.
Why adjust the headlights of your skoda octavia?
So let’s start our content with the benefit of adjusting the headlights of your skoda octavia. For most of us, our headlights are adjusted well enough, and they seem to light up enough after dark. Unfortunately this is not always the case and checking this setting, either because the headlights on your skoda octavia are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your skoda octavia for safety
First of all, the headlight adjustment of a skoda octavia must be achieved for a basic security explanation. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are supposed to switch to low beam lights when you cross a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your skoda octavia . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a skoda octavia for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a skoda octavia?
We will now proceed to the part that concerns you the most in this post, how to adjust the headlights of his skoda octavia? This adjustment may appear a bit difficult, but by following the instructions you should be able to complete it without too much issue.
Preparations to adjust the headlights of a skoda octavia
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his skoda octavia
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical adjustment of the headlights of your skoda octavia (they are usually marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your skoda octavia is logical, do not think twice to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your skoda octavia, please read our content on this subject matter.
In the event that you have any additional questions about the skoda octavia, do not hesitate to consult our skoda octavia category.
