Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle responsible – your headlights, as well called high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Peugeot Partner Tepee? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot Partner Tepee.
Why adjust the headlights of your Peugeot Partner Tepee?
So let’s start our article with the benefit of adjusting the headlights of your Peugeot Partner Tepee. For many of us, our headlights are adjusted well enough, and they seem to light up enough through the night. Unfortunately this is not constantly the case and looking at this setting, either because the headlights on your Peugeot Partner Tepee are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Peugeot Partner Tepee for safety
To begin with, the headlight adjustment of a Peugeot Partner Tepee must be conducted for a very easy security motive. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too strong, even if you are expected to switch to low beam lights when you cross a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Peugeot Partner Tepee . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Peugeot Partner Tepee for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot Partner Tepee?
We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Peugeot Partner Tepee? This adjustment may seem a bit complex, but by following the recommendations you should have the ability to complete it without too much concern.
Preparations to adjust the headlights of a Peugeot Partner Tepee
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot Partner Tepee
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your Peugeot Partner Tepee (they are in general marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Peugeot Partner Tepee is coherent, do not hesitate to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Peugeot Partner Tepee, please read our article on this subject matter.
To find more tips on the Peugeot Partner Tepee, take a look at the Peugeot Partner Tepee category.
