If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle responsible – your headlights, as well called high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Peugeot Partner 2? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot Partner 2.
Why adjust the headlights of your Peugeot Partner 2?
So let’s begin our content page with the benefit of adjusting the headlights of your Peugeot Partner 2. For most people, our headlights are adjusted sufficiently, and they seem to light up enough after dark. Unfortunately this is not always the circumstance and checking this setting, either because the headlights on your Peugeot Partner 2 are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Peugeot Partner 2 for safety
To begin with, the headlight adjustment of a Peugeot Partner 2 must be done for a simple security explanation. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. Alternatively, if your headlights are too powerful, even if you are meant to switch to low beam lights when you cross a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Peugeot Partner 2 . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Peugeot Partner 2 for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot Partner 2?
We will now move on to the part that concerns you the most in this post, how to adjust the headlights of his Peugeot Partner 2? This adjustment may appear a bit difficult, but by simply following the guidelines you should have the ability to do it without too much problem.
Preparations to adjust the headlights of a Peugeot Partner 2
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot Partner 2
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, identify the screws for horizontal and vertical modification of the headlights of your Peugeot Partner 2 (they are generally designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Peugeot Partner 2 is coherent, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Peugeot Partner 2, please read our content page on this subject.
In the event that you have any further questions about the Peugeot Partner 2, do not hesitate to consult our Peugeot Partner 2 category.
