If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one part of your car responsible – your headlights, also named high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Peugeot Expert? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot Expert.
Why adjust the headlights of your Peugeot Expert?
So let’s start our content page with the interest of adjusting the headlights of your Peugeot Expert. For the majority of us, our headlights are adjusted good enough, and they seem to light up enough during the night. Unfortunately this is not always the circumstance and examining this setting, either because the headlights on your Peugeot Expert are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Peugeot Expert for safety
To begin with, the headlight adjustment of a Peugeot Expert must be done for a basic safety reason. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to anticipate a curve badly. On the other hand, if your headlights are too strong, even if you are supposed to switch to low beam lights when you cross a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Peugeot Expert . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Peugeot Expert for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot Expert?
We will now go forward to the section that concerns you the most in this article, how to adjust the headlights of his Peugeot Expert? This setting might seem a bit difficult, but by simply following the guidance you should be able to do it without too much issue.
Preparations to adjust the headlights of a Peugeot Expert
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot Expert
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical control of the headlights of your Peugeot Expert (they are usually marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Peugeot Expert is logical, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Peugeot Expert, please go through our content page on this subject.
If you want more guides on the Peugeot Expert, go to our Peugeot Expert category.
