If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one component of your car to blame – your headlights, as well called high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Peugeot e-2008? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot e-2008.
Why adjust the headlights of your Peugeot e-2008?
So let’s start our content page with the interest of adjusting the headlights of your Peugeot e-2008. For the majority of us, our headlights are adjusted well enough, and they appear to light up enough at night. However this is not always the case and looking at this setting, either because the headlights on your Peugeot e-2008 are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Peugeot e-2008 for safety
First of all, the headlight adjustment of a Peugeot e-2008 must be conducted for a simple security motive. If it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you cross a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Peugeot e-2008 . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Peugeot e-2008 for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot e-2008?
We will now move on to the section that interests you the most in this article, how to adjust the headlights of his Peugeot e-2008? This setting may seem a bit difficult, but by following the instructions you should have the ability to accomplish it without too much issue.
Preparations to adjust the headlights of a Peugeot e-2008
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot e-2008
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Peugeot e-2008 (they are usually designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Peugeot e-2008 is logical, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Peugeot e-2008, please go through our content page on this subject matter.
If you need more tutorials on the Peugeot e-2008, go to our Peugeot e-2008 category.
