If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one component of your vehicle responsible – your headlights, also known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Peugeot Boxer? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot Boxer.
Why adjust the headlights of your Peugeot Boxer?
So let’s begin our content with the interest of adjusting the headlights of your Peugeot Boxer. For many of us, our headlights are adjusted well enough, and they appear to light up enough at night. Unfortunately this is not constantly the circumstance and checking this setting, either because the headlights on your Peugeot Boxer are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Peugeot Boxer for safety
To begin with, the headlight adjustment of a Peugeot Boxer must be done for a basic safety motive. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle driving, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you pass a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Peugeot Boxer . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Peugeot Boxer for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot Boxer?
We will now move on to the part that concerns you the most in this article, how to adjust the headlights of his Peugeot Boxer? This setting may appear a bit difficult, but by following the instructions you should have the ability to accomplish it without too much trouble.
Preparations to adjust the headlights of a Peugeot Boxer
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot Boxer
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Peugeot Boxer (they are usually designated, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Peugeot Boxer is logical, do not think twice to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Peugeot Boxer, please read our content on this subject matter.
If perhaps you have any further questions about the Peugeot Boxer, do not hesitate to consult our Peugeot Boxer category.
