Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle guilty – your headlights, also named high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Nissan Sentra? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan Sentra.
Why adjust the headlights of your Nissan Sentra?
So let’s begin our content with the interest of adjusting the headlights of your Nissan Sentra. For most people, our headlights are adjusted sufficiently, and they seem to light up enough at nighttime. Unfortunately this is not constantly the case and checking this setting, either because the headlights on your Nissan Sentra are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Nissan Sentra for safety
To begin with, the headlight adjustment of a Nissan Sentra must be made for a simple safety explanation. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle driving, or to predict a curve badly. However, if your headlights are too powerful, even if you are meant to switch to low beam lights when you pass a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Nissan Sentra . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Nissan Sentra for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Nissan Sentra?
We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Nissan Sentra? This adjustment might seem a bit complicated, but by following the recommendations you should have the ability to accomplish it without too much concern.
Preparations to adjust the headlights of a Nissan Sentra
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Nissan Sentra
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Nissan Sentra (they are usually designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Nissan Sentra is coherent, do not hesitate to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Nissan Sentra, please go through our content on this subject.
If you wish more tutorials on the Nissan Sentra, go to our Nissan Sentra category.
