Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your car to blame – your headlights, also often known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Nissan Pulsar? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan Pulsar.
Why adjust the headlights of your Nissan Pulsar?
So let’s start our content page with the benefit of adjusting the headlights of your Nissan Pulsar. For most of us, our headlights are adjusted good enough, and they seem to light up enough at nighttime. However this is not constantly the circumstance and checking this setting, either because the headlights on your Nissan Pulsar are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Nissan Pulsar for safety
To begin with, the headlight adjustment of a Nissan Pulsar must be done for a simple safety reason. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to predict a curve badly. On the other hand, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you cross a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Nissan Pulsar . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Nissan Pulsar for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Nissan Pulsar?
We will now move on to the part that interests you the most in this article, how to adjust the headlights of his Nissan Pulsar? This setting might seem a bit complicated, but by following the recommendations you should be able to complete it without too much problem.
Preparations to adjust the headlights of a Nissan Pulsar
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Nissan Pulsar
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the headlights of your Nissan Pulsar (they are usually marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Nissan Pulsar is coherent, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Nissan Pulsar, please go through our content page on this subject.
To find more tips on the Nissan Pulsar, take a look at the Nissan Pulsar category.
